ACF-1KB integrated multi parameter orifice flowmeter_Smart Gas Fields_Products and Solutions

ACF-1KB integrated multi parameter orifice flowmeter

The ACF-1-KB integrated multi parameter orifice flowmeter has a simple structure, no movable parts, stable and reliable long-term use, and high accuracy. High degree of standardization, good linearity, and no need for real flow calibration. Orifice flowmeter is flexible and convenient to use; At present, the most widely used flow measurement in China is still the differential pressure flowmeter, which is estimated to account for (75-85)% of the total usage of flow instruments according to relevant data. It is widely used in industries such as steam boilers, petroleum, chemical, steel, electricity, water conservancy, papermaking, pharmaceuticals, food, and chemical fibers.

Main Features

1. Simple structure, safe and reliable, long service life, suitable for single well natural gas and coalbed methane metering

2. Convenient to replace the orifice plate, can adjust the measurement range in a large range, and meet the needs of changes in single well production capacity at various stages

3. No need for real-time calibration, high precision, convenient for mass production

4. Resistant to high and low temperatures, high pressures, capable of measuring gases, liquids, and vapors, with a wide range of applications

5. Simultaneously display cumulative flow rate, instantaneous flow rate, pressure, and temperature

6. Output 4-channel (4~20) mA standard current signal and RS485 standard communication interface

Specifications

project	Technical Specifications
Nominal Diameter	DN20~DN1000
Nominal Pressure	（0~32）MPa
medium temperature	（-50~700）℃
System accuracy	Level 0.5, Level 1, Level 2, Level 3, Level 5
Range ratio	4 ﹕1
Requirements for straight pipe sections	Front 10D, rear 5D
connection method	Flange clamping type, pipeline welding type, integrated embedded type
ambient temperature	（-30~70）℃
Storage humidity	Not exceeding 85%
power supply method	Internal power: 3.6V industrial lithium battery, sustainable operation for no less than 2 years External power: (7-30) V DC, working current less than 30mA
output method	RS485 通讯接口，标准 MODBUS RTU 协议 4 通道（4~20）mA 标准电流信号，精度 0.1%FS
Explosion-proof marking	Ex db IIB T4 Gb
Protection level	IP65

ACQDJK integrated valve

Independent self-supporting emergency shut-off valve, independent equal percentage regulating valve, metering system based on regulating valve, intelligent management throughout the entire life cycle, integrated sleeve pressure, oil pressure, pipe pressure, and valve core temperature detection functions, ultra-low power consumption of the system, static working current of only 20mA

Intelligent allocation and injection system

The gas injection and gas lift process is mainly used for the resumption of production of water flooded and water locked gas wells. The current gas injection and gas lift scheme relies on manual inspection of the gas well (pressure, flow rate, etc.) and compressor (operating parameters, load, etc.) status, and manual setting of flow distribution target values, which has problems such as low operational efficiency, high risk of human error, and delayed real-time response

ACPR intelligent plunger

Periodic monitoring of wellbore pressure, temperature, and dynamic liquid level has been achieved, effectively solving the problem of the inability of existing plunger gas lift processes to monitor wellbore pressure changes and track dynamic liquid level dynamics in real time. This provides a new intelligent drainage and stable production technology solution for low-pressure and low yield gas wells