ACFC wellhead gas-liquid two-phase flowmeter_Smart Gas Fields_Products and Solutions

ACJK-3 metering intelligent control valve

Realize cost-effective flow measurement function, providing reliable support for process flow control and monitoring

ACQD self operated shut-off valve

The high and low voltage cutoff thresholds as well as the overtemperature cutoff threshold can be precisely set to meet the safety control requirements of various scenarios

ACQDJK integrated valve

Independent self-supporting emergency shut-off valve, independent equal percentage regulating valve, metering system based on regulating valve, intelligent management throughout the entire life cycle, integrated sleeve pressure, oil pressure, pipe pressure, and valve core temperature detection functions, ultra-low power consumption of the system, static working current of only 20mA

PDAC500 Integrated IoT System for Gas Wells

Resolve issues related to power supply, data acquisition and control, equipment networking, and security monitoring at the well site

Intelligent allocation and injection system

The gas injection and gas lift process is mainly used for the resumption of production of water flooded and water locked gas wells. The current gas injection and gas lift scheme relies on manual inspection of the gas well (pressure, flow rate, etc.) and compressor (operating parameters, load, etc.) status, and manual setting of flow distribution target values, which has problems such as low operational efficiency, high risk of human error, and delayed real-time response

ACZJ Gas Field Wellhead Intelligent Injection System

The ACZJ gas field wellhead intelligent injection system is a set of surfactants that can bubble when encountering water and are injected from the gas well wellhead to the bottom of the well

ACPR intelligent plunger

Periodic monitoring of wellbore pressure, temperature, and dynamic liquid level has been achieved, effectively solving the problem of the inability of existing plunger gas lift processes to monitor wellbore pressure changes and track dynamic liquid level dynamics in real time. This provides a new intelligent drainage and stable production technology solution for low-pressure and low yield gas wells

ACFC gas-liquid two-phase metering skid

By utilizing the different densities of gas-liquid fluids and the principle of gravity settling, the two-phase fluid is separated through a separation device to separate gas and liquid

ACF-1KB integrated multi parameter orifice flowmeter

Simple structure, safe and reliable, long service life, suitable for single well natural gas and coalbed methane metering

project	Technical Specifications
Nominal Diameter	routine DN50/DN80
measurement range	Gas phase maximum 100000 Nm ³/d (customizable) Liquid phase maximum 480m ³/d (customizable)
Single phase accuracy	Gas phase 1.0, liquid phase 1.5
Mixing error	Low water content (<20%) mixing error ≤± 7% mixing error ≤± 10% High water content (≥ 20%) mixing error ≤± 10% mixing error ≤± 20%
turndown ratio	Mixed flow ratio greater than 1:40
Liquid resolution	±0.1%
communication protocol	Modbus RTU agreement
output signal	RS485
Explosion-proof rating	Ex db ia （ia Ga） IIC T4 Gb
Protection level	IP65
Operating Temperature	（-40~70）℃
power supply	Wide voltage power supply（11~30）VDC
Nominal Pressure	routine 6.3/10/16（MPa）
output data	Instantaneous cumulative flow rate of gas, instantaneous cumulative flow rate of liquid, moisture content, differential pressure, temperature, static pressure

Products and Solutions

Smart Gas Fields